Table of Contents
Advertisement
WHAT?
HOW?
HOW OFTEN?
suitable brass cleaner and polish,
following manufacturer's instructions.
1. Check that the burner is turned
2. Clean the ignitor with a small
Ignitors
1. Wait until the grates have cooled
2. Carefully lift the grates off the
3. To remove stubborn stains, soak
Burner grates
4. Wash in a mixture of hot water
1. To remove stubborn stains, soak
2. Wash in a mixture of hot water
Wok ring
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90SCG6B1/User_Guide_OR90SCG6B1/0...
OFF.
brush (eg old toothbrush) or
cotton swab that has been
dipped into rubbing alcohol.
completely.
cooktop and place them on a
protected surface.
the grates in a mixture of clothes
washing detergent and water.
and dishwashing liquid, then
rinse and allow to dry.
◦ The grates are also
dishwasher safe.
the grates in a mixture of clothes
washing detergent and water.
and dishwashing liquid, then
rinse and allow to dry.
◦ The wok ring is also
dishwashersafe.
IMPORTANT!
• The ignitors must be kept clean and dry to
work correctly. Dirty or wet ignitors could
cause constant clicking and sparking, even if
a flame is present.
• Take care, the grates are heavy.
• Make sure you place a dish towel or other
soft cover on the surface before putting a
grate on it.
Updated: Thu, 06 Apr 2023 10:59:08 GMT
Powered by
6
Advertisement
Table of Contents
