Removing The Processor Module - Dell XPS L701X Service Manual

Back to Contents Page
Processor Module
Dell™ XPS™ L701X Service Manual
Removing the Processor Module
Replacing the Processor Module
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the Processor Module
1. Follow the instructions in
2. Remove the battery (see
3. Remove the module cover (see
4. Remove the memory module(s) (see
5. Follow the instructions in
6. Remove the optical drive (see
7. Remove the palm-rest assembly (see
8. Remove the keyboard (see
9. Remove the display assembly (see
10. Remove the Mini-Card(s) (see
11. Remove the bluetooth card (see
12. Follow the instructions from
13. Turn the top-cover assembly over.
14. Remove the heat sink (see
CAUTION:
to apply slight pressure to the centre of the processor while turning the cam screw.
CAUTION:
15. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
Removing the Module
Removing the Memory
step 5 in Removing the Hard
Removing the Optical
Removing the Palm-Rest
Removing the Keyboard).
Removing the Display
Removing the Mini-Card(s)).
Removing the Bluetooth
step 13 to step 18 in Removing the Top
Removing the Heat Sink).
To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press
To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.
UserManuals.info
Removing the
Cover).
Module(s)).
Drive(s).
Drive).
Assembly).
Assembly).
Card).
Cover.
Battery) before working inside the