Dell XPS L701X Service Manual page 83

Back to Contents Page
MXM Assembly (Optional)
Dell™ Inspiron™ One 2305/2310 Service Manual
Removing the MXM Assembly
Replacing the MXM Assembly
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
Removing the MXM Assembly
1. Follow the instructions in
2. Remove the back cover (see
3. Follow the instructions from
4. Remove the system-board shield (see
5. Remove the MXM-assembly fan (see
6. Remove the three screws that secure the MXM-assembly to the chassis.
7. Remove the MXM assembly from the MXM-assembly connector.
NOTE: The appearance of the system board may vary based on your computer model.
1 MXM assembly connector
3 screws (3)
Replacing the MXM Assembly
1. Follow the instructions in
2. Align the notch on the MXM assembly with the tab in the MXM-assembly connector.
3. Insert the MXM assembly at a 45-degree angle into the MXM-assembly connector.
4. Replace the three screws that secure the MXM assembly to the chassis.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
The MXM assembly may be very hot during normal operation. Ensure that it has had sufficient time to cool before you touch it.
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Before You Begin.
Removing the Back Cover).
step 2 to step 5 in Removing the Front
Removing the System-Board
Removing the MXM-Assembly
2 MXM assembly
Before You Begin.
UserManuals.info
Stand.
Shield).
Fan).