1
tape
13. Pull the pull-tab to disconnect the camera cable from the connector on the camera module.
14. Lift the camera module off the display back cover.
1
camera-cable connector
Replacing the Camera Module
1. Follow the instructions in
2. Connect the camera cable to the connector on the camera module.
3. Adhere the tape that secures the camera cable to the camera module.
4. Use the alignment posts to place the camera module on the display back cover.
5. Replace the display bezel (see
6. Replace the display assembly (see
7. Replace the keyboard (see
8. Replace the palm-rest assembly (see
Great user manuals database on
2
camera module
2
camera module
Before You
Begin.
Replacing the Display
Bezel).
Replacing the Display
Assembly).
Replacing the
Keyboard).
Replacing the Palm-Rest
UserManuals.info
Assembly).