Removing The Palm-Rest Assembly - Dell XPS L701X Service Manual

Back to Contents Page
Palm-Rest Assembly
Dell™ XPS™ L701X Service Manual
Removing the Palm-Rest Assembly
Replacing the Palm-Rest Assembly
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the Palm-Rest Assembly
1. Follow the instructions in
2. Remove the battery (see
3. Remove the module cover (see
4. Remove the memory module(s) (see
5. Follow the instructions in
6. Remove the optical drive (see
7. Remove the three screws that secure the palm-rest assembly to the base cover.
8. Turn the computer over and open the display as far as possible.
9. Using your fingertip, gently push the tab to release the palm-rest assembly from the top cover.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
Removing the Module
Removing the Memory
step 5 in Removing the Hard
Removing the Optical
UserManuals.info
Removing the
Cover).
Module(s)).
Drive(s).
Drive).
Battery) before working inside the