Advertisement
3
Mounting the Camera
The camera can be mounted onto a flat surface using the screws and wall plugs provided. The surface must
have sufficient strength to hold the camera (the camera illustrated is for instructional purposes only).
→
Position the camera in the location you want to mount it, and mark the screw holes on the surface to
position the screws (a mounting template has been included). Then, using the appropriate screws for the
surface you're fixing the camera to, secure the camera in place.
→
If you're mounting to a wooden surface, then screw the camera directly to the surface.
→
If you're mounting to a masonry surface (bricks, concrete or similar), then you'll need to use wall plugs.
Aiming the camera
1.
Loosen both screws (use a Phillips head screwdriver) to ad-
just the camera's orientation. This enables you to rotate the
camera so no matter what direction it is facing, your images
will be the right way up. Tighten each screw to secure in place.
2.
Loosen the screw to tilt the camera up or down. Tighten the
screw to secure in place.
3.
To pan the camera left or right, loosen the screw and position
accordingly. Tighten the screw to secure in place.
3
1
2
Advertisement
