Advertisement
3
Mounting the Camera
The camera can be mounted onto a flat vertical or horizontal surface
and must be of sufficient strength to hold the camera.
Step 1:
(1)
Press the button
to release the dome enclosure and the
1
dome camera from the mounting bracket.
Step 2:
(2)
You will see a black cable
connected to the camera, which
2
2
in turn is connected to the camera bracket's black cable.
(3)
Rotate the seal cap
clockwise and gently pull apart the connection
3
to disconnect. Remove the dome camera from the camera bracket.
Step 3:
Position the mounting bracket in the location you want to
mount the dome camera to. Using a pencil or magic marker, mark
4
4
(4)
(5)
the mounting holes
and hole
for the camera's cable.
5
Use a hole saw that you can attach to a drill to make a hole for the
cable. A large drill bit can also be used.
(continued on next page)
4
Advertisement
