Swann PRO-780 User Manual

Pro-series

Advertisement

Quick Links

English
PRO-780
M780CAM190312E
1

Advertisement

Table of Contents
loading

Summary of Contents for Swann PRO-780

  • Page 1 English PRO-780 M780CAM190312E...
  • Page 2: About The Camera

    Connect the camera to your DVR (or other recording/monitoring device) - see page 4. Choosing a Location The PRO-780 is very flexible, and can be installed practically anywhere. Some of the things you’ll have to consider when choosing a location are: •...
  • Page 3: Adjusting The Lens

    Adjusting the Lens The zoom and focus controls are located on the rear of the camera. ZOOM: The left hand dial controls the level of zoom. You can vary the viewing angle between 23° and 81°. This is an approximately 3x optical zoom, which operates in a similar manner to the zoom on your digital camera.
  • Page 4: Connection Guide

    Connect the camera’s DC www.swann.com/osdpro and BNC socket cable to the There’s also a little more extension cable’s DC and BNC plugs information on page 6.
  • Page 5 Connect the extension cables DC socket to the DC plug on the power adapter Plug in the camera power adapter into a wall socket 2B. Connecting to Your Existing DVR Connect the BNC extension cable to an open channel on the back of the DVR...
  • Page 6 So, we’ve created an online guide you can access at: www.swann.com/osdpro Of course, you don’t have to use this feature at all. The PRO-780 will work perfectly well if you never even connect the controller – it’ll adjust all of its settings automatically.
  • Page 7 Mounting There are three ways that you can mount the PRO-780: to a wall (1, recommended) or to a horizontal surface, either above (2) or suspended (3, requires additional hardware). To mount the camera, use the supplied mounting hardware (screws).
  • Page 8: Helpdesk / Technical Support Details

    Any unit which proves defective during the stated period will be repaired without charge for parts or labor or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred to send the product to Swann’s repair centers. The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin.

Table of Contents