Removing/Installing Front Shock Absorbers - Invacare LYNX Series Manual

REPLACEMENT PARTS - PANTHER MX - 4
14. Install the NEW bolt securing the NEW hand
brake assembly to the handle bar. Refer to DE-
TAIL "A". Securely tighten.
Hand
Brake
Assembly
Bolt
DETAIL "A"
Adjusting Nut
Cable Lock
DETAIL "B"
Brake Cable
Slit In
Slit In
Adjusting
Cable
Nut
Lock
DETAIL "C"
Brake Cable
DETAIL "D"
FIGURE 6 - REPLACING HAND BRAKE
ASSEMBLY
REMOVING/INSTALLING FRONT
SHOCK ABSORBERS (FIGURE 7)
Removing
1. Separate the front frame assembly from the rear
Handle
2. Remove the front wheels. Refer to REMOVING/IN-
Bar
3. Flip the front frame assembly onto its side.
4. Remove the TOP bolt on the right front shock
Hand
Brake
5. Remove the BOTTOM bolt on the right front
Assembly
6. Slide the right front shock absorber away from
7. If necessary, repeat this procedure for the other
Installing
1. Slide the right front shock absorber onto the front
DO NOT overtighten the bolt securing the
right front shock absorber to the tie rod as-
sembly. Otherwise, damage to the right front
shock absorber may occur.
2. Install one (1) bolt through the BOTTOM mount-
3. Align the mounting hole in the TOP of the right
Hand
Brake
Assembly
DO NOT overtighten the bolt securing the
right front shock absorber to the front frame
assembly. Otherwise, damage to the right
front shock absorber may occur.
Slits
4. Install one (1) bolt through the TOP mounting hole
53 53
frame assembly. Refer to TRANSPORTING THE
SCOOTER in PROCEDURE 10 of the Owner's
Manual, part number 1090132.
STALLING THE FRONT WHEELS in PROCEDURE
9 of the Owner's Manual, part number 1090132.
absorber.
shock absorber.
the front frame assembly.
front shock absorber.
frame assembly, aligning the mounting hole in
the bottom of the right front shock absorber with
the mounting holes in the tie rod assembly.
CAUTION
ing hole in the right front shock absorber and the
BOTTOM mounting holes in the tie rod assembly.
Torque the hex cap screws between 122 - 148
in./lbs.
front shock absorber with the mounting holes in
the front frame.
CAUTION
of the right front shock absorber and the TOP
mounting holes in the front frame assembly. Torque
the hex cap screws between 122 - 148 in./lbs.
PROCEDURE 11
R
E
P
L
A
C
E
M
E
N
T
P
A
R
T
S
P
A
N
T
H
E
R
M
X
4