Direction Control; Using Direction Control - Garmin GHP 10V Marine Autopilot System Owner's Manual

Powerboat Autopilot Operation
adjusting the step steering Increments
1. From the heading screen, select Menu > Steering Mode > Step Turn
Size.
2. Select or
3. Select Done.
steering with the soft Keys
With the autopilot engaged, you can manually adjust the heading from the
heading screen.
NoTe: If the autopilot is steering a pattern
heading cancels the pattern.
Select an option:
• If you have step steering enabled, select
• If you have rudder steering enabled, select
The autopilot steers the boat, and the heading screen shows your actual
heading and intended heading
➊
4
to set the step turn size.
(page 5), manually adjusting the
and
and
.
➋
➋
➊

Direction Control

When your boat is properly equipped, you can control the drive direction of
the boat (forward or reverse) using the autopilot.

Using Direction Control

From the Heading screen, select an option:
• When traveling forward in standby mode, select Direction to engage
reverse.
The autopilot engages reverse drive and the message "Rev" appears
in orange on the heading screen.
• When traveling in reverse in standby mode, select Direction to
engage forward.
The autopilot engages forward drive and the message "Rev" is
.
removed from the heading screen.
.
GHC 10 Owner's Manual