Circles Pattern - Garmin GHP 10V Marine Autopilot System Owner's Manual

Powerboat Autopilot Operation

Circles Pattern

The circles pattern steers the boat in a continuous circle, in a specified
direction, and at a specified time interval.
setting Up the Circles Pattern
You can adjust the time the autopilot takes to complete the circle. The
default value creates a circle that takes 5 minutes to complete.
1. From the heading screen, select Menu > Pattern Steering > Circles >
Time.
2. Select or
3. Select Done.
Following the Circles Pattern
1. From the heading screen, select Menu > Pattern Steering > Circles.
2. Select engage.
3. Select an option:
• Select to begin a clockwise turn.
• Select to begin a counter-clockwise turn.
6
to set the time.
The autopilot follows the circles pattern, and the heading screen shows
the time of the circles pattern ➀.
The autopilot positions the boat so that the circle pattern is centered on
the location at which you engage the pattern.
TIP: To quickly resume a pattern after you make a heading adjustment with
the helm or the soft keys (page 3), select the center soft key twice.
➀
GHC 10 Owner's Manual