Transceiver And Handset Display - Garmin VHF 200 Owner's Manual

Vhf 100, vhf 200 series
Table of Contents

Advertisement

Transceiver and Handset Display

The Home screen is the most-viewed screen in the system. It displays all of your current
information, such as the current channel, the frequency band, and the channel name.
System-status
icons
Channel
Channel—current working channel.
Frequency band—current frequency band: International, Canadian, or USA.
Latitude, Longitude, and Time—current latitude, longitude, and time are displayed if
the transceiver is connected to a GPS device. If the transceiver is not connected to a GPS
device, you can manually enter the position and the time that you entered the position data.
Speed Over Ground (SOG)/Course Over Ground (COG)—current SOG or COG is
displayed if the transceiver is connected to a GPS device.
Soft keys—used to select items. The function of these keys changes depending on what you
are doing.
System-status icons—see the following table.
RX
Squelch level is
broken by reception
of an incoming signal
Saved channel
Auto channel
changing disabled
VHF 100/200 Series Owner's Manual
RX
TX
25
W
1W
DISTRESS
16
WATCH
PA
Soft keys
TX
Transmitting
LOCAL
Receiver mode
for areas with radio
frequency interference
(such as harbors)
Incoming or missed
DSC call
LOCAL
ATIS
USA
"‰°Š‹.Œ'''ƒ
ˆ‰Š°‹Œ.''"'†
ˆ‰:‹Œ UTC
""MPH ˆ'"°T
SCAN
25
W
Transmitting at
25 watts
ATIS
ATIS enabled
Weather alert
Getting Started
Frequency band
Latitude
Longitude
Time
Speed Over Ground/
Course Over Ground
1W
Transmitting at
1 watt
Position tracking
enabled
External GPS
connected


Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vhf 200iVhf 100iVhf100 - 25w vhf radioVhf 100 series

Table of Contents