Working With The Call Logs - Garmin VHF 200 Owner's Manual

Position data received from stations that respond to position-request calls is sent over the
NMEA network, so that you can track the vessels using your Garmin chartplotter. For more
information on NMEA 0183 and NMEA 2000, see
Selecting the Vessels and Activating the Call
1. Press the DSC key.
2. Select POS. TRACKING
the position tracking list at one time. If you select
triple error beep, you must delete an entry before adding another.
3. Select the vessels from the directory.
4. Select BEGIN TRACKING. The
in progress.
5. Select EXIT to stop position tracking.
Viewing and Deactivating Vessels on the Position Tracking List
1. Press the DSC key.
2. Select POS. TRACKING.
3. To view the vessels on the list, select VESSELS.
4. To configure the radio to keep a vessel on the list, but to not call that vessel for position
tracking information, select the vessel.
5. Select OFF.
Deleting a Vessel from the Position Tracking List
1. Press the DSC key.
2. Select POS. TRACKING
3. Select the vessel.
4. Select YES to delete the vessel from the list. Select
without deleting.

Working with the Call Logs

For every DSC call that your radio receives, the calling station, type of call, and date and
time of the call are recorded in the call logs. The latitude and longitude of the calling station
are also recorded if they are transmitted with a call.
There are three categories for calls that are logged: distress, position, and other. The
following table indicates where each type of call is located in the call logs.
Call Type
Distress
Distress relay
VHF 100/200 Series Owner's Manual
> ADD ENTRY. You can have no more than three vessels on
icon is displayed to indicate that position tracking is
> DELETE.
Call Log
Distress
Distress
page 29.
ADD ENTRY and the radio sounds a
NO to return to the previous screen
Digital Selective Calling
2