Removing The Mounting Frames - Epson ActionPC 5000 User Manual

Removing the Mounting Frames

If there are mounting frames attached to your hard disk drive,
remove them before you install the drive. Follow these steps:
1. On your drive, there may be a plastic guiderail and metal
grounding plate attached to one of the mounting frames. If
so, remove the screws securing them to the mounting
frame and remove the guiderail and grounding plate.
2. Then remove the two screws securing each mounting frame
to the drive and remove the frames.
plastic guiderail
mounting frames
Installing and Removing Drives
5-5