Assigning Hard Disk Drive Types - Epson ActionPC 5000 User Manual

You cannot change these values; if they are not what you
expect them to be, check your jumper settings. Also, check that
the SIMM(s) are securely seated in their sockets. (See
chapter 4.)
Setting the diskette drive(s)
On your system, diskette drive A is the 3.5-inch, highdensity
drive installed in the computer. You may also have another
drive of a different size or capacity; this is drive B. Check the
settings for both drives and correct them if necessary.

Assigning Hard Disk Drive Types

The Fixed Disk Setup option defines the types of hard
disk drives you have installed in your system. When you select
this option, you see the Fixed Disk Setup screen. From this
screen, select Fixed Disk 0 Control or Fixed Disk 1
Control.
Your computer comes with a hard disk auto-sensing feature.
Press Enter when the Autotype Fixed Disk option is
highlighted. The system detects the type of hard disk drive and
fills in the remaining fields on the screen.
If you are using an older drive or a preformatted drive, it may
not support the auto-sensing feature. If you press Enter when
the Autotype Fixed Disk option is highlighted and the
drive parameters do not match your drive, check Appendix A
to see if your drive's parameters are included in the hard disk
drive table. If not, you need to define your own drive type or
reformat the disk. See the next section for instructions on how
to define your own drive type.
Running SETUP and Installing Drivers
2-5