Connecting A Keyboard Or Mouse; Connecting A Monitor - Epson ActionPC 5000 User Manual

Connecting a Keyboard or Mouse

To connect a keyboard, hold the cable connector so the arrow
on the connector faces up. Insert it into the port marked K/B.
If you have a PS/2 compatible mouse, connect it to the
computer's built-in mouse port by inserting the connector into
the port marked MOUSE.
Caution
Although the connectors and ports for the mouse and
keyboard are physically identical, they cannot be used
interchangeably. Be sure to plug the mouse connector into
the MOUSE port, or you may damage your system.
If your system has not already been configured, you may need
to install a mouse driver. See your mouse manual for
instructions. (If you are using Windows, the Windows
installation program automatically loads a mouse driver for
Windows applications.)

Connecting a Monitor

You can connect your VGA or SVGA monitor to the computer
built-in VGA port as described below.
1. Place your monitor near the computer. Turn the monitor and
computer around so the backs are facing you.
2. There should be two cables provided with your monitor: the
monitor cable (to connect it to the computer) and the power
cable (to connect it to the power source). On most monitors,
the monitor cable is permanently attached to the monitor. If
your monitor does not have an attached cable, connect the
cable to it now.
Setting Up Your System 1-5