Fixing Condition Settings; Enabling Fixed Settings - Epson PhotoPC 3000Z User Manual

Fixing Condition Settings

In manual mode, you can save your automatic exposure,
white balance, sensitivity, shutter speed, and aperture settings
for one photo, and apply them to other photos. This is useful
if you want a consistent appearance in a series of shots.
NOTE
You can't use fixed settings when you are using an optional
external flash.

Enabling Fixed Settings

Make sure your camera is set to Manual mode as described
on page 1-9. Then follow these steps to enable fixed settings:
1
Turn the dial to and press the POWER button to
turn on the camera. You see the SETUP menu:
Adjusting Exposure and Color Settings
2
Press the button next to Shot SETUP . You see the Shot
SETUP menu:
3
Press the button next to FixSet to change the setting to
On .
4
Press the button under BACK to return to the SETUP
menu.
Now you can capture shots with fixed settings. See the
section below.
5-10