Attaching The Lens Cap - Epson PhotoPC 3000Z User Manual

4
After securing the fastener, turn it so that the screw
sleeve is covered by the strap, as shown below.
5
Repeat steps 1 through 4 to attach the other end of the
strap to the other side of the camera.
Setting Up Your Camera

Attaching the Lens Cap

Follow these steps to secure the lens cap to the camera:
1
Pass the end of the string with the shorter loop through
the eyelet on the edge of the lens cap.
2
Then, pass the end of the string with the longer loop
through the shorter loop.
3
Pull the end of the string with the longer loop tight.
1-7