Epson PhotoPC 3000Z User Manual page 170

The LCD screen turns off automatically when the
camera is connected to (and communicating with)
a computer or video device.
The lens is still out even though the camera is turned off.
The camera may have shut off automatically. To retract
the lens, press the POWER button to turn the camera
back on, then press it again to turn the camera off.
The batteries may be low. Connect the camera to the
optional AC adapter, or replace or recharge the batteries.
Then turn the camera on and back off to retract the lens.
The image on the screen is too dark.
Adjust the brightness of the screen using the Camera
SETUP menu. See page 7-3 for instructions.
The menus disappear from the LCD screen.
The menus disappear when you press the MENU
button. Press the MENU button again to make them
reappear.
Maintenance and Troubleshooting
You can't take certain types of pictures or make all the
settings you want.
Some of the camera's settings and features can't be used
at the same time. For example, you can't use continuous
shooting mode and set the image quality to
or Tiff) at the same time.
To adjust certain settings like white balance, exposure,
and sensitivity settings, or to use fixed settings, you
need to set your user mode to Program or Manual.
See page 1-9 for details.
Uncompressed Tiff mode images are 9.1MB. You can
take only one picture in this mode with your included
memory card. For high quality images that take up less
memory, try using HyPict mode. See Chapter 2 for
details.
To use an optional external flash, you need to set your
user mode to Manual. See page 1-9 for details on
changing your user mode and Appendix B to use an
external flash.
(HyPict
A-6