Checking The Picture Counter; Checking Other Status Information - Epson PhotoPC 3000Z User Manual

Although you may be able to use the camera with low
batteries, it needs full battery power to operate reliably.
NOTE
Several factors can affect battery life, including the surrounding
temperature and the type of batteries you use. Low
temperatures—especially below 50 °F (10 °C)—drain batteries
faster. See page 1-2 for battery use instructions.

Checking the Picture Counter

The large number in the lower right of the status display
panel shows how many additional pictures you can take.
This number is affected by the image quality setting. Also,
if you have any audio and/or video recordings stored on your
memory card, the number on the display panel may be
greater than the actual number of remaining pictures.
When the memory card is full, the number on the display
panel reads 0 , the camera status light on the back of the
camera flashes red, and you can no longer use the shutter
Taking Pictures
button. Before you can take any more pictures, you need to
delete some of the images on the memory card. (See page 6-3
for instructions.)
If you want to save your photos before you delete them,
connect the camera to your computer (as described in
Chapter 9), then transfer the pictures (as described in
Chapter 10).

Checking Other Status Information

Instead of the number of pictures remaining, you may see
one of the following in the lower right corner of the status
display panel:
In Program mode or Manual mode, the
exposure value appears on the left and the
shutter speed appears on the right when
you hold the shutter button down halfway.
See page 1-9 for more information about
user modes.
When you turn the camera's dial to
SEt is displayed. No other information
appears in the status display panel.
,
2-3