Installing Batteries - Epson PhotoPC 3000Z User Manual

Installing Batteries

Before you install (or remove) batteries, make sure the
camera is turned off.
1
Hold the camera upside down.
2
Press and hold down the battery cover lock and slide the
cover out to open it.
battery cover
lock
Setting Up Your Camera
3
Insert four batteries into the compartment, positioning
the + and ends as shown below.
4
Lower the battery cover and slide it in, as shown below.
When the battery power is almost out, a low battery icon
appears on the camera's display panel. Be sure to remove
and recharge all four batteries at the same time.
1-4