Setting The Custom White Balance - Epson PhotoPC 3000Z User Manual

The setting, which appears in the status display panel
next to the W.B. mark, remains in effect while you take
pictures.
white
balance
setting
NOTE
When nothing appears next to W.B. on the display panel, the
camera is in the fixed white balance mode.

Setting the Custom White Balance

Follow these steps to customize the white balance setting:
1
Remove the camera's lens cap and press the POWER
button to turn on the camera.
2
Turn the camera dial to
menu. If necessary, change to Program or Manual user
mode.
Adjusting Exposure and Color Settings
to display the SETUP
3
Press the button next to Shot SETUP to go to the Shot
SETUP menu.
4
Press the button below New W/B .
5
You see a screen asking you if you want to save a new
setting for the custom white balance mode. Press the
button next to Yes to save a new white balance setting.
The camera's lens moves out (if it isn't already out). You
see a message with a framed area that the camera's lens
uses to set the white balance.
6
Focus the camera on a piece of white paper, or some
other object to set the white balance by, and press the
shutter button to save the setting.
5-8