Changing The Metering Method - Epson PhotoPC 3000Z User Manual

7
Press the button under BACK to return to the main
SETUP menu.

Changing the Metering Method

If you're using Manual mode, your camera lets you choose
between matrix metering and spot metering. With matrix
metering, the camera automatically samples light from the
entire image area and determines the correct exposure. You
can use spot metering to choose a point, such as your
subject's face, to determine the exposure.
Follow these steps to change the metering system:
1
Make sure that the camera is set to Manual user mode.
(See page 1-9 for details.)
2
Turn the camera dial to
In Viewfinder mode, press the MENU button.
If you are taking pictures with the LCD screen, you see
the View menu with a preview of your image.
Adjusting Exposure and Color Settings
or .
3
Press the button under Menu Change . You see the
following screen. The current metering setting is in the
lower right corner.
Viewfinder
4
Press the button next to Metering to change the setting
to spot or matrix
When you take a picture with spot metering, make sure the
center of the camera's lens is focused on the area on which
you want it to read the light.
LCD Screen
metering.
5-9