Epson PhotoPC 3000Z User Manual page 68

Locks the white balance setting at 5200 °K. This
FIX
setting gives your pictures a warmer appearance
under fluorescent lighting. It's also a good choice
for retaining the reds in a sunset or sunrise.
CUST Lets you customize the white balance setting. See
page 5-8 to set the custom white balance.
Make sure the camera is turned on, then follow these steps to
change the white balance setting:
1
Make sure the camera is set to Program or Manual user
mode. (See page 1-9 for instructions.)
2
Turn the camera dial to
In Viewfinder mode, press the MENU button.
If you are taking pictures with the LCD screen, you see
the View menu with a preview of your image.
Adjusting Exposure and Color Settings
or .
3
Do one of the following:
If the user mode is set to Program, press the button
under W/B to select FIX or CUSTOM .
Viewfinder
If the user mode is set to Manual, press the button
under Menu Change . You see the following
screen. Press the button under W/B to select FIX or
CUSTOM .
Viewfinder
LCD Screen
LCD Screen
5-7