Shutting Down The Projector; Selecting The Image Source - Epson PowerLite 1716 User Manual

note
Lamp life will vary
depending on mode selected,
environmental conditions,
and usage.
Turn off this product when
not in use to prolong the life
of the projector.
note
To focus and adjust the
image, see page 21. If a
projected image fails to
appear, see page 19 for help.
Displaying and Adjusting the Image
18

Shutting Down the Projector

This projector incorporates Instant Off technology. To turn it off, you
can press its P
Power
off a power switch that supplies power to the projector. You don't
have to wait for the projector to cool off first.
1. To turn off the projector, press the
button on the remote
Power
P
control or projector.
You see a confirmation message.
(If you don't want to turn it off, press any other button.)
2. Press the P
Power
and you can unplug the power cord.
If you want to turn the projector on again, make sure the orange
P power light is not flashing, then press the P
3. If you extended the adjustable front foot, press up on the foot
release lever to retract it.
4. Close the A/V Mute slide.

Selecting the Image Source

Selecting the image source lets you switch between images input from
different pieces of connected equipment (such as a computer or DVD
player).
If you don't see the image you want, press the
remote control or the
Source Search
you see the image you want to project.
button as described below, unplug it, or turn
button again. The projection lamp turns off
button on the projector until
button.
Power
button on the
Search