Epson PowerLite 1716 User Manual page 103

■
Resolution
When set to
Auto
is automatically detected so it can be scaled to fit in the
projection area. If the image doesn't display properly after
you adjust the aspect ratio setting (see page 32), select
to project from a computer with a wide-panel display, or
for a computer with a 4:3 or 5:4 display.
Normal
■
Tracking
Adjust this value to eliminate vertical stripes in the image.
■
Sync
Adjust this value if the image appears blurry or flickers.
■
Position
If the image is slightly cut off on one or more sides, it may
not be centered exactly. Select this setting and use the
pointer button to center it.
■
Progressive
Select for moving images or
On
notice video delays during high-speed gaming, turn this
setting off.
■ Input Signal
If the colors don't look right on the
setting for the type of equipment you've connected to the
Computer (Component Video)
: For a computer connection.
RGB
Component Video
component video signal.
■ Video Signal
Leave this setting at
system (then select
■
Aspect
Choose an aspect ratio setting that allows the image to fit best
in the display area. See page 32 for details.
, the resolution (size) of a computer image
for still images. If you
Off
Auto
port:
: For a video player that outputs a
unless you are using a 60-Hz PAL
Auto
).
PAL60
Wide
setting, select the
Fine-Tuning the Projector
tip
Before adjusting tracking or
sync, fill the screen with an
image containing fine
detail, such as black text on
a white background.
103