Table of Contents
Advertisement
Is the Machine Installed in a Location Subject to Strong Wind Such as from an Air
Conditioner?
If so, adjust the air direction and volume of the air conditioner.
If that does not work, setting [Switch Paper Feed Method] to [Print Side Priority] may improve the problem.
Touch Panel Model
[Home] on the operation panel
[Switch Paper Feed Method]
5 Lines LCD Model
[Home] on the operation panel
Feed Settings]
* When you select [Print Side Priority], the printing speed for 1-Sided printing will decrease.
Step 3: Checking the Special Processing Setting
Is [Special Processing] Enabled?
If so, setting [Special Processing] below to [Off] may improve the problem.
●
[Reduce Ppr. Sticking at Output]
●
[Env. Flap Closing Prevention]
●
[Paper Curl Correction]
Touch Panel Model
[Home] screen on the operation panel
[Special Processing]
5 Lines LCD Model
[Home] screen on the operation panel
Quality]
Troubleshooting
[Menu]
[Drawer 1]
[Menu]
[Switch Paper Feed Method]
[Menu]
[Menu]
[Special Processing]
[Function Settings]
[Common]
[Print Side Priority]
[Function Settings]
[Drawer 1]
[Adjustment/Maintenance]
[Adjustment/Maintenance]
509
[Paper Feed Settings]
[Common]
[Paper
[Print Side Priority]
[Special Processing](P. 406)
[Adjust Image Quality]
[Adjust Image
Advertisement
Table of Contents
