Table of Contents
Advertisement
➠
After the message [Settings applied.] appears, the [RX Mode Settings] screen is displayed.
Step 3: Setting the RX Mode
Answer the questions on the screen to select the proper RX mode.
1
On the RX mode settings screen, press [Next].
2
Answer the questions displayed on the screen by pressing [Yes] or [No].
➠
When you have completed answering all the questions, the selected RX mode is displayed on the screen.
When Connecting the Optional TELEPHONE 6 KIT
●
For the question [Do you want to connect a telephone to the device?], press [Yes].
●
For the question [Do you want to use the answering machine of the telephone to be connected to the
device?], press [No].
3
Check the selected RX mode.
The RX modes operate as follows:
* Depending on your country, [Net Switch] is also available for the receiving mode.
Mode and Setting the Action when Receiving a Fax(P. 220)
[Fax/Tel (Auto Switch)]
Enables use of both fax and telephone.
●
Faxes are automatically received.
●
When a telephone call is received, the machine rings. Pick up the handset to answer the call.
[Auto]
Used for fax only.
●
Faxes are automatically received.
●
Incoming telephone calls cannot be answered.
[Answering Machine]
Enables use of both fax and phone.
●
Faxes are automatically received.
●
When a telephone call is received, the answering machine function can be used to record messages. You
can answer the call by picking up the handset before recording starts.
* Set the answering machine so that the recording function activates after the machine rings one or two
times.
* When recording your message, it is recommended that you keep about four seconds of silence, or keep
the entire message within 20 seconds.
[Manual]
Setting Up
94
Changing Fax RX
Advertisement
Table of Contents
