Table of Contents
Advertisement
●
To display the screen for the function being used before the Auto Reset, specify the screen in [Selected
Function].
[Default
Function]
[Selected Function]
[Auto Shutdown Time]
[Menu]
[Preferences]
Set a timer to automatically shut down the machine after a specified period of idle time has elapsed since the machine
entered the sleep mode.
When the [Auto Shutdown Time] setting is enabled, the machine may automatically shut down even if you are
operating the machine from Remote UI. A malfunction may occur, particularly if the machine shuts down while data is
being imported. When you import data using Remote UI, set [Auto Shutdown Time] to [Off] in advance.
* If any settings of the [Timer Settings] are changed from Remote UI while the machine is in the sleep mode, the timer
for the [Auto Shutdown Time] setting is reset to the beginning. The machine automatically shuts down after a specified
period of idle time has elapsed since the timer was reset.
* Depending on your country or region, the [Auto Shutdown Time] setting may not be available, or its content or
default setting may be different.
0 (Off)
1 to
4
to 8 (hr.)
[Auto Sleep Time]
[Menu]
[Preferences]
Set the time after which the machine automatically goes into sleep mode.
Mode)(P. 106)
* Use of the default settings is recommended to achieve the most effective power savings.
1
to 60 (min.)
Settings Menu Items
[Timer/Energy Settings]
[Timer/Energy Settings]
Reducing Power Consumption (Sleep
383
Advertisement
Table of Contents
