Table of Contents
Advertisement
Adjusting the Image Quality
You can adjust the image quality such as when the copied image is not clear or the text is difficult to read. You can also
erase dark borders and shadows that appear around the edges of the original when copying.
* Erase Frame is not available when making copies using the ID Card Copy function.
◼
Selecting the Image Quality for the Original Type
1
Press [Original Type] on the copy screen.
➠
The [Original Type] screen is displayed.
2
Select the original type.
➠
The copy screen reappears.
When Copying Originals with Both Text and Photos
Select [Text/Photo (High Speed)] or [Text/Photo (Quality)].
Giving Priority to Speed over Image Quality
Place the original in the feeder, and select [Text/Photo (High Speed)].
Giving Priority to Image Quality over Speed
Select [Text/Photo (Quality)], adjust to make text or photos more visible, and press [Apply].
Copying Photos Containing Halftone Dots such as in Magazines
Select [Photo].
Copying Originals with Large Volumes of Text such as Research Papers
Select [Text].
◼
Erasing Dark Borders and Shadows around Edges of the Original (Erase Frame)
This function erases the dark borders and shadows that appear around the edges in the copied image when copying
originals that are smaller than the paper size or thick originals.
* This cannot be set at the same time as N on 1.
1
Press [Erase Frame] on the copy screen.
➠
The [Erase Frame] screen is displayed.
2
Press [On].
➠
The screen for specifying the frame width to erase is displayed.
3
Enter the frame width to erase, and press [Apply].
➠
The [Scan Size] screen is displayed.
Copying
252
Advertisement
Table of Contents
