Table of Contents
Advertisement
Scanning (Saving to a Computer)
Required Preparations
●
Make preparations such as installing the scanner driver (ScanGear MF) and application (MF Scan Utility) to
the computer used as the save location.
●
If the ScanGear MF screen appears on the computer used as the save location, close the screen.
Touch Panel Model(P. 201)
5 Lines LCD Model(P. 202)
Touch Panel Model
1
Place the original.
2
On the operation panel, press [Scan] in the [Home] screen.
➠
The scan type selection screen is displayed.
3
Press [Computer].
➠
The screen to select the computer to be used as the save location is displayed.
When you are using the machine only with a USB-connected computer, the scan screen is displayed.
4
Select the scan setting, and press
➠
Scanning of the original starts.
●
The scanned data format, save location on the computer, and other settings are set for each scan setting.
The original is scanned according to the selected scan setting.
Scanning
You can scan an original and save the scanned data to a computer connected to the
machine. By just operating the machine, you can save scanned data to a computer.
The original is scanned and the data is saved according to the settings of MF Scan
Utility installed on the computer.
Preparing to Save Scanned Data to a Computer(P. 199)
Placing Originals(P. 128)
.
201
94WS-05H
[Home] Screen(P. 112)
Advertisement
Table of Contents
