Default Settings
The table below shows the default conditions that become valid when
the printer is initialized.
I Item
Top of form position
Left and right margins
Line spacing
Vertical tab position
Horizontal tab positions
VFU channel
Font selection
CPI
Justification
Special printing effects
addition, the data buffer is cleared when the printer is initialized by
In
turning on the power or by an INIT signal.
Note: The user-defined character set is not cleared when the printer is
initialized.
Technical Specifications
Current paper position
Cancelled
1/6-inch line spacing
Cleared
Every eight characters
Channel"0
Reset to the current SelecType setting
Reset to the current SelecType setting
Left justification
Cancelled
Reset to:
A-9