Problems And Solutions; The Printer Does Not Print; The Printer Stops Printing - Epson FX-1050 User Manual

Troubleshooting
This chapter discusses problems you may encounter and their likely
solutions. At the back of the chapter is a section on the data dump
mode. This mode helps more experienced users determine the causes of
communication problems between the printer and the computer.

Problems and Solutions

This section lists possible problems and their likely solutions,

The printer does not print

Be sure the printer is turned on and the
l
printer is turned
printer is fully plugged in and that the electrical outlet is also
the
turned on.
Be sure
the ON LINE
l
button.
Be sure the printer is connected securely to the computer. Check both
l
ends of the cable between the printer and the computer.
Be sure the printer is not out of paper. (The
l
be off.)
If the printer still does not print, disconnect the printer from
computer and try the self test described in Chapter 1. If the self test
works properly, the printer is working and the problem probably lies in
the computer, the software, or the cable. If the self test does not work,
contact your Epson dealer.

The printer stops printing

The printer may be out of paper. Check
l
The paper may be jammed. Remove the jammed paper and reload.
l
The ribbon may be jammed. See the section
l
in Chapter 5.
6-2
but the
on POWER
light is on. If it is not on, press the
light is on. If
POWER
light is not check to see that
on,
PAPER OUT
paper supply.
the
replacing the ribbon
on
the
ON LINE
light should
the
Troubleshooting