Single Sheet Insertion - Epson FX-1050 User Manual

Single sheet insertion

Your cut sheet feeder also has a single sheet loading feature. This feature
allows you to switch to a different type of paper (such as letterhead)
without replacing the supply of paper that is loaded in your cut sheet
feeder. Single sheet insertion is especially useful because it allows you to
use micro-adjustment to change your cut sheet feeder loading position.
1. Press
the ON LINE
2. Align the single sheet to be fed with
guide, and then slide the sheet into the printer path until you feel
resistance.
Press the
3. LOAD/EJECT
Note: If you want to use single
consecutive pages,
otherwise, the next sheet is loaded from paper stored in the cut sheet
feeder bin.
4. Press the
ON LINE
micro-adjustment to change the loading position for your cut sheet
feeder. See the section on micro-adjustment in Chapter 2.
7-14
button to take the printer off line.
button to load the sheet.
sheet insertion for two or more
pull
the cut sheet feeder's paper set levers forward;
button to put
marking on the left paper
the
printer on line. Now you can use
the
Using Printer Options