Epson FX-1050 User Manual page 160

ESC $
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
This sequence specifies the distance from the currently set left margin
that subsequent characters are to be printed, using this formula: total
number of dots = nl +
inch. The sequence is ignored and the previous setting remains
effective if the position specified is beyond the right margin. This
command applies to both draft and NLQ.
ESC \
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Determines the position (relative to the current position) at which
printing of following data will start. To find nl and n2, first calculate
the displacement required in 1/12Oths of an inch. Send the resulting number
using this formula: total number of dots = nl + (n2
displacement is to the left, subtract the number from 65536 before you
use the formula. The command is ignored if it would move the print
position outside the current margins. This command applies to both
draft and NLQ.
Command Summary
ESC $
27 36
nl
1B 24
(n2 X 256).
ESC 1
27 92
1B 5C
Set Absolute Print Position
nl n2
n2
nl n2
Each unit equals 1/60th of an
nl ti
nl d
nl n2
Set Relative Position
256). If the
X
8-21