Table of Contents
Advertisement
SONY
SONY
DWX
MULTI-CHANNEL SYSTEM SET UP (Without use of Wireless Studio Software)
ABOUT THE SONY DWX DIGITAL WIRELESS SYSTEM
This will scan the environment and find a list of clean frequencies. You can choose what order you would like the
frequencies to appear in CHANNEL COORDINATE > SCAN RESULTS ORDER, and either select Increasing
Interference or Increasing Frequency.
Once the scan is complete you can choose to either Auto assign or manually assign the frequencies.
a)
If selecting frequencies purely for the purpose of set up (as recommended in step 2)
-
Select Auto assign and select any group (D7 is recommended for allocation)
b)
If on site and selecting frequencies for deployment and use
-
Select Auto assign (unless there are specific frequencies you wish to avoid)
-
Select a D group (please see figure 2 for details on Sony groups)
QL
CH COORDINATE > MODE
TV21-23
SELECT ASSIGNMENT MODE
[MANUAL]
RF
This will then assign frequencies to all channels within the network and band.
If you need to avoid specific frequencies then please select to manually assign.
4.
Assigning Frequencies without channel coordinate (different BANDS)
To manually allocate frequencies without the use of channel coordinate.
•
RECEIVER MENU
o
QL
BAND
GP/CH
ACTIVE CH SCAN
CLEAR CH SCAN
RF
K
DWX
Digital Wireless Generation 3
AF/PEAK
[ AUTO ]
ALERT
GP/CH Select group and channel frequency for each receiver channel.
TV21-23
D1
/2102
ALERT
Contact Karno Sound for 24hr support:
07747515123 | 07715103222 | 07732398619
Email : contact@karno.com
QL
0
CH COORDINATE > GP
D1
-20
D2
-36
D3
-60
RF
BATT
QL
AF/PEAK
0
D1
D2
-20
D3
-36
-60
RF
BATT
TV21
16
TV22
16
TV23
16
ALERT
ALERT
AF/PEAK
0
-20
-36
-60
BATT
AF/PEAK
0
-20
-36
-60
BATT
7.
Advertisement
Table of Contents
