Table of Contents
Advertisement
SONY
SONY
DWX
MULTI-CHANNEL SYSTEM SET UP (Without use of Wireless Studio Software)
ABOUT THE SONY DWX DIGITAL WIRELESS SYSTEM
9.
Redundancy on site
If your environment changes onsite (e.g. you move venue/another RF system is bought in) we would recommend
using channel coordinate to allocate new frequencies (Step 3). Please make sure all transmitters are on, paired,
and in the Cross Remote range to do this.
Below are four options for changing frequency 'on the fly', CrossRemote™ is needed in option a, b and c, and
Audio is lost at some point for varying amounts of time (depending on method), so please read through before
performing anything mid-performance.
1.
Quickest single channel change
•
RX MENU
o
GP/CH.
• Select current Group. Scroll through frequencies to find a clear frequency (Audio is lost at this point).
The RF meters show noise on that frequency, therefore select one with minimum noise. Once selected,
you will be prompted to send to Tx (Please make s sure all transmitters are on, paired and in the Cross
Remote range to do this).
QL
BAND
GP/CH
ACTIVE CH SCAN
CLEAR CH SCAN
RF
K
DWX
Digital Wireless Generation 3
AF/PEAK
TV21-23
D1
/2110
BATT
ALERT
QL
GP/CH
GP/CH
RF
Contact Karno Sound for 24hr support:
07747515123 | 07715103222 | 07732398619
Email : contact@karno.com
QL
0
GROUP D1
2102
2106
-20
2110
-36
-60
RF
AF/PEAK
SEND
TX
SEND
TX?
[NO]
[YES]
BATT
ALERT
AF/PEAK
> CHANNEL
479.250MHz
470.750MHz
471.250MHz
BATT
ALERT
0
-20
-36
-60
0
-20
-36
-60
11.
Advertisement
Table of Contents
