Installing Dss Player Pro - Olympus DS-3000 Software Manual

Installing DSS Player Pro

DSS Player Pro is made up of two sections - a Dictation Module and a Transcription Module. You
need to enter the license ID that is supplied with the product during installation to run this software.
Notes
- If you intend to use speech recognition software, it must be installed first. For instructions on
installing the speech recognition software, refer to the user's guide supplied with the speech
recognition software.
- If you are running Windows NT4.0/2000/XP on a network, you need to log in as an administrator
or use a user name that has administrator's rights.
1
Insert the DSS Player Pro CD-ROM into the CD-ROM drive.
The installer launches automatically.
Note
If the installer does not launch automatically, follow these steps.
It is assumed that the CD-ROM drive is assigned drive letter D.
(1) Click the "Start" button and select "Run."
(2) Type "D:Setup.exe" in the "Open" field and click "OK."
2
The "Welcome to Olympus DSS Player Pro Setup" dialog box opens.
Exit all applications other than the installer and then click "Next."
Note
If you are running Windows NT4.0/2000/XP, you need to log in as an administrator or use a user
name that has administrator's rights.
3
Register user information.
Register user information. Enter your name, company name, and license ID number (serial
number). The license ID number is printed on the license ID card. Click "Next." A confirmation
dialog box opens. Click "Yes."
4
Confirm acceptance of License Terms.
You must accept the License Terms to install DSS Player Pro. If you accept, click "Yes."
5
Select where to install DSS Player Pro.
Specify the folder in which to install DSS Player Pro. Click "Browse" to change the installation
folder. To use the default folder, click "Next."
Note
If the installation folder does not exist, a folder creation confirmation dialog box opens. Click
"Yes."
6
Select a program menu folder.
You may change the program menu folder to another one, such as "Start Up". To use the default
folder, click "Next."
7
Confirm the start of file copying.
Confirm all "Current Settings." To accept them, click "Next."
Note
To change the program menu folder or installation folder, click "Back."
7