Table of Contents
Advertisement
2.1 Parameters
2.1.1 Local parameters
M-167.3-Serie-MA-EN / 11.2021
By selecting the "Parameters" option, you can configure the
local and special parameters as shown in the following figures:
If "NO" is selected for the "LED blink" function, then the LED
flashing is disabled for all the points recognised during the line
interrogation.
This function can be used in some environments such as
hospitals, hotels, etc.
The LED flashing can also be disabled for each point
(refer to the sensor and module programming
paragraphs).
To enable/disable the "LED blink" function, press the enter
then use the arrow buttons to change the value;
button
when you have finished, press the enter button
MAx panel Fire Detection System
to confirm.
15
Advertisement
Table of Contents
