Detaching The Computer From The Mcd - Compaq Armada 4100 Reference Manual

. . . . . . . . . . . . . . . . . . . . . . . . .

Detaching the Computer from the MCD

Detach the computer from the MCD according to these steps:
1. Turn off the computer and disconnect external devices.
2. Close the computer and ensure that the handle is in the up
position.
3. Turn the computer and MCD over, bottom side up. Turn the two
thumbscrews on the bottom of the MCD counterclockwise to
loosen the MCD from the computer.
4. Turn the computer and MCD over again, right side up.
5. Rotate the eject lever on the back of the MCD n down. Remove
the computer from the guide hooks on the MCD by sliding the
computer o up and away from the right side of the MCD.
6. Reach underneath the computer and close the expansion slot on the
bottom of the computer.
7. Open the display and turn on the computer. Connect external
devices.
Detaching the Computer from the MCD
Maximizing Your Portable Expansion Unit 7-7