Exiting Hibernation - Compaq Armada 4100 Reference Manual

. . . . . . . . . . . . . . . . . . . . . . . . .

Exiting Hibernation

To resume work after Hibernation is initiated, do the following:
1. While the computer is still in Hibernation, install a fully charged
battery pack or connect to an external power source, if installed
batteries aren't sufficiently charged.
2. Turn on the computer by pressing the power button once. The
computer exits Hibernation. Information saved to the hard drive
returns to the screen at the point where Hibernation was initiated.
NOTE: To stop the restoration of information, press Fn+Ctrl+Break.
5-6 Managing Power