Product Identification - New Holland 300 Series Service Manual

Product identification

Write your machine model number, Product Identification Number (PIN), and serial numbers on the lines provided
below. Always give these numbers and component plate numbers to your dealer when you need parts or information
for your machine.
Make a record of the numbers. Keep this record and your manufacturer's statement of origin in a safe place. If the
machine is stolen, report the numbers to your local law enforcement agency.
MACHINE
Machine Model and Type
Product Identification Number
Year of Build
Engine Serial Number
Hydrostatic Pump Serial Number
Bucket Serial Number
Product Identification Number (PIN)
• Outside right-hand side of chassis - vertical lift.
• Inside left-hand side loader arm tower - radial lift.
INTRODUCTION
51517858 10/11/2020
43
1
RCPH11SSL005AAD
2
RAIL14SSL0713AA