New Holland 300 Series Service Manual page 18

INTRODUCTION
Do not leave equipment in raised position while parked or during service, unless securely supported. Hydraulic cylin-
ders must be mechanically locked or supported if they are left in a raised position for service or access.
Loader buckets, forks, etc. or other lifting, handling, or digging equipment and its load will change the center of gravity
of the machine. This can cause the machine to tip on slopes or uneven ground.
Load items can fall off the loader bucket or lifting equipment and crush the operator. Care must be taken when lifting
a load. Use proper lifting equipment.
Do not lift load higher than necessary. Lower loads to transport. Remember to leave appropriate clearance to the
ground and other obstacles.
Equipment and associated loads can block visibility and cause an accident. Do not operate with insufficient visibility.
51517858 10/11/2020
11