Set The Backlight Delay; Set The Language - A.O. Smith CAWH 8-455-6 Installation, User And Service Manual

9.6.3
EN
n
9.6.4
56

Set the backlight delay

If you set the display brightness to 1 or higher, the display becomes brighter when you
press a button. The backlight delay sets how long it takes before the backlight switches
back to low level.
To change the backlight delay:
1. From the Display Settings submenu open the Backlight Delay control screen.
2. Change the setting:
a) Use [+] to increase the time that the backlight is on.
b) Use [-] to decrease the time that the backlight is on.
Note
When the backlight delay is set to 240 s (maximum value), the backlight will
be continuously on.
3. Press [ACCEPT] to confirm the value or press [BACK] to return to the previous
screen.

Set the language

To change the language:
1. From the Display Settings submenu open the Language control screen.
2. Use [+] and [-] to change the language setting.
3. Press [ACCEPT] to confirm the value or press [BACK] to return to the previous
screen.
When you press [ACCEPT], the display restarts. This does not influence the control
system.
Installation, Maintenance and Service part