Set The Display Brightness; Set The Backlight Delay - A.O. Smith DRE PLUS Installation, User And Service Manual

9.6.2
EN
9.6.3
n
58

Set the display brightness

By default, the brightness of the display is low (brightness=0). If you set the brightness to
1 or higher, the display backlight becomes brighter when you press a button.
To change the display brightness:
1. From the Display Settings submenu open the Brightness control screen.
2. Change the setting:
a) Use [+] to increase the brightness.
b) Use [-] to decrease the brightness.
3. Press [ACCEPT] to confirm the value or press [BACK] to return to the previous
screen.

Set the backlight delay

If you set the display brightness to 1 or higher, the display becomes brighter when you
press a button. The backlight delay sets how long it takes before the backlight switches
back to low level.
To change the backlight delay:
1. From the Display Settings submenu open the Backlight Delay control screen.
2. Change the setting:
a) Use [+] to increase the time that the backlight is on.
b) Use [-] to decrease the time that the backlight is on.
Note
When the backlight delay is set to 240 s (maximum value), the backlight will
be continuously on.
3. Press [ACCEPT] to confirm the value or press [BACK] to return to the previous
screen.
Installation, Maintenance and Service part