Power Supplies
Installing Power Supplies
Note. The power supply shown in the following diagrams may differ from the actual unit. However,
comparable installation and removal steps also apply to other power supply units.
Insert the power supply into a power supply bay at the rear of the chassis and slide it back until it is
1
securely seated in the chassis backplane.
When the connector is fully seated, the lock tab will click and hold the power supply in place.
Plug the power cord (provided) into the power supply's socket.
2
page 3-22
Lock Tab
OmniSwitch 6570M Hardware Users Guide
Chassis and Power Supplies
December 2022