Configuring Access Numbers - Nortel ICB Administrator's Manual

24 Browser User Interface
7 In the From E-mail address field, enter the e-mail address which
8 Do one of the following:

Configuring Access Numbers

1 Log in to the Web Browser. See
2 Click Install Wizard on the Console.
3 Click Access Numbers on the left-hand side of the ICB
Figure 8: Install Wizard
Access Numbers panel
Standard 01.01 June 2007
the ICB Professional uses to identify itself. This e-mail address
appears in the From field of sent e-mail messages. Some e-mail
servers require this information. The initial factory default address is
conferencing@company.com (there is no such address).
a Click Submit & Continue to save the settings and continue to
the next step.
b Click Finish to save the changes and return to the Console. This
option is available only when editing the settings after installation,
not during a first installation.
c Click Console in the title frame to return to the Console without
saving the changes.
(page 17).
The ICB Professional Install Wizard window opens to the Basic
system Settings panel, see figure in
Settings (page 22).
Professional Install Wizard window.
The Access Numbers panel opens, as shown in following figure.
Accessing the Web Browser
Configuring Basic System