Broadcast Server
(800) A phone will not receive a page if it is already on a call initiated
•
from Visual Voicemail while listening to a voicemail message.
Likewise, the phone that is on the receiving end of that call will also
not receive a page.
(802) On Nortel IP Phones 2007, 1120E, and 1140E (GXAS), if you try
•
to page from the handset before turning on the microphone, the page
will not go through.
(1594) If the speaker is engaged by pressing the Speaker key, you
•
cannot initiate a page.
Workaround: Either page from the handset or choose the speaker from
the soft key after you initiate the page.
(1702) On Nortel IP Phone 2004, if the headset is being used to record
•
a reply to a Visual Voicemail message, incoming page audio plays
over the speaker rather than over the headset and the recording is
terminated.
(1850, 740) On Nortel phones a page cannot be initiated if the phone is
•
on a call (because the audio is unavailable).
(2040) On IP Phones 1120E and 1140E (XAS), the speech path is clipped
•
and/or delayed at the beginning of a page that is initiated through the
handset.
Nested zones are not yet supported.
•
The IP Phone 2002 does not display pushed title lines.
•
(451) After an alert is broadcast to an IP Phone 2001, the user must
•
press the Line key twice to obtain a dial tone.
(1875) Nortel IP Phones 2007, 1120E, and 1140E (GXAS) do not play the
•
audio tone sent with emergency alerts.
(2156) If Broadcast Server is installed in a custom path, the _Bin folder
•
is not removed during uninstallation.
(2310) Alerts that remain on the screen without expiring will continue
•
to accumulate on phones in GXAS mode. If a heavy volume of
long-lived alerts is delivered, the capacity of the Application Gateway
will be impacted. Please be sure that the number of current
(non-expired) alerts is kept to a reasonable level.
Deployment and Operation Notes
15