Using Voice-Over-Ip; Taking Photos - Motorola MC55 User Manual

Sample Scan Application with Preview Window
Figure 2-28
Move the MC55 until the red aiming reticle is over the bar code to scan.
4.
The Scan/Decode LED lights green and a beep sounds, by default, to indicate the bar code was decoded
5.
successfully.

Using Voice-Over-IP

The MC55 supports Voice over IP over WLAN (VoWLAN) using Motorola or third party voice clients. The MC55 can
communicate using VoIP either using the MC55 audio outputs, including back speaker phone, front receiver or
handset, and Bluetooth headset.
It is recommended that the wireless network use the 802.11a (5 GHz) band for voice applications. Using the 5 GHz
band avoids some noise sources that may occur on the 802.11b/g (2.4 GHz) band due to wireless interference.
When using a Bluetooth headset with the MC55 and VoWLAN, it is required to use the Bluetooth Headset profile
instead of Hands-free profile. Use the buttons on the MC55 to answer and end calls. See
Bluetooth for information on setting up a Bluetooth Headset Profile.

Taking Photos

To take a photo:
Tap Start > Programs > Pictures & Videos icon.
1.
Tap Camera on the command bar.
2.
Check the image on the view finder, adjust if necessary.
3.
Press the Enter key to take the picture. Hold the MC55 still until the shutter sound is heard.
4.
Using the MC55 2 - 35
Chapter 3, Using