Imager Scanning - Motorola MC55 User Manual

Linear Scanning
Figure 2-22
Press the scan button. Ensure the red scan beam covers the entire bar code. The Scan/Decode LED lights red
3.
to indicate that scanning is in process, then lights green and a beep sounds, by default, to indicate the bar code
was decoded successfully.
Correct
Linear Scanner Aiming Pattern
Figure 2-23

Imager Scanning

Ensure that a scan-enabled application is loaded on the MC55.
1.
Aim the scan window at the bar code.
2.
Imager Scanning
Figure 2-24
Press the scan button. The red laser aiming pattern turns on to assist in aiming. Ensure the bar code is within
3.
the area formed by the brackets in the aiming pattern. The Scan/Decode LED lights red to indicate that
scanning is in process, then lights green and a beep sounds, by default, to indicate the bar code was decoded
successfully. Note that when the MC55 is in Pick List Mode, the imager does not decode the bar code until the
crosshair touches the bar code.
Incorrect
Using the MC55 2 - 33